Hydraulic Auger Systems
Danuser offers Hydraulic diggers to fit 20 HP tractors and up for category I or II 3-pt hitch tractors. Danuser offers the only 100% Made in America Hydraulic diggers. Since 1943 Danuser has been the industry leader often referred to as the “Cadillac” of post hole diggers.
Model G20/40
Although many have tried to duplicate Danuser, we have a one-of-a-kind patent. For tractors with 20 – 40 HP. Cat. I – 3-pt hitch. 24” maximum diameter auger. 100% American made.
Model J20/80
For tractors with 20 – 80 HP. Cat. I or II – 3-pt hitch. 24” maximum diameter auger. 100% American made.
Model F8
“The Cadillac” of post hole diggers. Spiral bevel ring gear and pinion. For tractors with 40 HP and above. Cat. I or II – 3-pt hitch. 30” maximum diameter auger. 100% American made.
We have a Danuser Auger System for every mount type. Contact DRGAC Fleet & Ag service, to book your farm equipment
- Tractor 3-Pt Hitch Mount
- Front-End Loader Mount
- Skid-Steer Mount
- Backhoe Mount
- Mini Excavator Mount
- Excavator Mount
We also Sell Industrial and Agricultural Auger Bits
The Intimidator
The Intimidator is ideal for eliminating trees, saplings, shrubs, bushes, and other obstructions on the job site or farm. The unmatched versatility of the Intimidator handles the toughest stumps, posts, rocks, fencerows, and land-clearing jobs. Selectively eliminate what you want. Maneuver into tight locations and next to buildings or fences with ease. Remove the complete tree or stump, roots and all. Remove larger trees, even with smaller skid-steers or tractors, using the replaceable excavator bucket teeth and vertical jaw saw teeth to dig and cut roots.
Uniquely synchronized jaws, designed for less wear and tear on the vehicle, are actuated by a rear-mounted, fully-protected 3″ diameter cylinder, allowing the operator to aggressively excavate objects without fear of damage to the cylinder. Tapered jaws allow for larger trees to be gripped near the back of the jaws, maximizing pulling force. The bidirectional side saw teeth on the 12200T model provide a more aggressive design that allows you to cut off trees flush to the ground. Maximum horsepower rating = 125 HP.
Lower operating costs than a bulldozer and less work than a chainsaw. Intimidate your job with the Danuser Intimidator.
The T3 Post Driver is a small driver that delivers big time results!
The T3 Driver will drive T-posts up to a 3″ O.D. pipe at a rate of up to six strikes per second. The top of the post is fully contained to prevent kick out and protected from damage by the strike plate. Use your tractor, skid-steer, mini-ex, loader, or backhoe to carry the weight of the driver. This is an ideal post driver for most farmers, ranchers, and fencing contractors.
Drive like a pro even on your own With the Hornet
Quick and powerful post driver that utilizes jackhammer style power cell that offers controlled high-speed performance. The hydraulic grapple allows one person to pick up, load, and drive posts, making the Hornet an all-in-one driving solution. Tilt Option allows up to 20° tilt left or right.
The model T7 drives T-posts up to 7″ diameter posts/pipes with 500-900 strikes/minute and compares to the 750 ft.-lb. energy class. The model T8-RR drives T-posts up to 8″ diameter posts and pipes at 400-800 strikes/minute and compares to the 1,150 ft.-lb. energy class. The railroad tie flat driving tool allows the unit to drive railroad ties, posts, and pipes up to 12″.
Hornet post drivers come standard with a flow control valve, allowing the post driver to run on vehicles with hydraulic flows up to 30 GPM. Tool-less quick change feature makes swapping driving tools without hammer or punch a breeze. An additional weight kit lets operators fine-tune driver weight to match vehicle operating capacity which can increase driving speed up to 50% faster than base unit.
Achieve a full stroke with every cycle or utilize the short stroke feature to fine tune your depth
The Hammer drop weight post driver delivers full-impact performance with every cycle—no springs, no hydraulics, no return lines. The 300 lb. hammer drops a full 40 inches for fast, effective driving—and an optional weight kit allows you to increase the total weight to 500 lb., delivering up to 60% more impact force for tougher posts. Use the full stroke for maximum power or switch to short stroke mode for fine-tuned depth control. Add the grapple for true one-person operation and tilt control for up to 20˚ of precision—without ever leaving your vehicle seat.
